self adhesive bitumen flashing tape/flashband

Original
price: Negotiable
minimum:
Total supply:
Delivery term: The date of payment from buyers deliver within days
seat: Beijing
Validity to: Long-term effective
Last update: 2017-12-09 17:56
Browse the number: 134
inquiry
Company Profile
 
 
Product details
1.5mm Aluminized Asphalt waterproofing self-adhesive roofing underlay membrane
This products can be used for general flashing applications, sealing glazing bars, sealing leaks in gutters, valleys, down pipes, capping, caravan seams and various corrugated and flat roofs. Also suitable for sealing roof lights and repairs to cracked glass.
a. instant waterproof seal, even in famp conditions.
b.quick and easy to apply, no specialist tools required.
c.4 layers or protection: lacquer foil, membrane and bitumen adhesive
d.superior temperature resistance from -20℃ to +100℃ -easily moulds to contours.
e.long lasting protection, at least 15 years
f.available in a wide range of sizes.
Storage Life: 12 months stored between 5 ℃ and 25℃ in original containers

1. Product description:
The product is a kind of polymer modified asphalt materials, using polyester carpet or glass mat for the matrix, the surface covered with polyethylene film, aluminum foil or fine sand, the base covered with a release sheet,keep the self-adhesive flexible waterproof. The product has a good self-adhesive and bending properties.
2. Application:
Construction is simple, clean, and can be widely used in roofing, basement, bathroom, etc. waterproofing works, and for legislation to pave and stick and pipe wall (except heat pipes), bridges , and other complex environment, especially in open flame is prohibited, covert fire waterproofing works.
Cut flashing to the required length, remove the release film and press down the adhesive bitumen to the previously prepared surface.
Ensure full contact by smoothing down with a cloth, taking care to eliminate air bubbles.
Final rolling down of the edges with a wallpaper roller will ensure a good edge seal.
All overlaps should be a minimum of 25mm and well rolled down.
Note: In cold weather adhesion will be imporved by storing the roll in a warm room for 12 hours or more before use, or by gently warming the strip during application.Do not apply below 5 ℃.
Total0bar [View All]  Related Comments
 
more»Other products

[ Products search ] [ favorites ] [ Tell friends ] [ Print ] [ Close ]